BT30 ATC 3KW Automatic tool change electric water spindle motor & 3.7KW VFD 220V

Description

BT30 ATC 3KW Automatic tool change electric water spindle motor & 3.7KW VFD 220V
Package include:
1 x
3KW ATC Water-cooled
spindle motor
220V
BT30 400HZ 24000rpm 100mm
1 x
3.7KW
220V
Fuling
Brand
Inverter VFD
1 x
BT30-ER25
tool holder
with 45 degree pull stud
1 x user manual
Ps:inverter's parameters already set well to run this spindle.
100% Brand New and High Quality!!!
Product overview
1.This spindle is built-in type spindle motor, built-in three asynchronous motors,by the inverter control.As the spindle has a compact structure,high power, big torque, small vibration, low noise characteristics,so it can achieve high speed,high powe cutting,high precision and high stability operation.
2.The bearing of spindle use grease lubricated angular to contact bearings,can be achieved lifelong lubricating within the life cycle.
3.The spindle use forced coolling mode to coolling motor,front and rear bearings.Coolant flow through the reasonable arrangement cycle watercourse of the spindle body,thus can take the heat generated of the spindle rotation speed, to achieve thermal equilibrium,let spindle temperature within a certain constant value. External cooling device effect:maintaining a constant temperature of the coolant.
4.The spindle built-in PTC 140 temperature sensor(Technical parameters are visible in other sections of this specification),you can read it anytime if you need to protect the motor temperature.
5. The tool clamping methods:this spindle built-in automatic tool change device,shank form is BT30.
3.7KW VFD Fuling Inverter 220V
Inverter Number: Fuling 220v 3.7kw
Input Voltage: 220v(+/-15%)
Input Frequency: 50/60Hz
Input Phase: 1 or 3 phase
Output Voltage: 220vAC
Output Frequency: 0-1000 Hz
Output Current:15A
Output Phase: 3 phase
Warranty: 2 year from the date you purchased
Two speed control modes: no PG vector control (SVC), V/F control
No PG vector control (SVC): starting torque 0.5Hz up to 150%
8-stage simple PLC function, multi-speed control and PID control
Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
I/O terminals can be freely programmed to combine multiple working modes according to user needs.
With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.
With instantaneous power-down retention function, it can avoid the impact of production due to instantaneous power failure
With over torque and under torque detection
Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor
Provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation
Built-in reactor with inverter above 37kW, which improves the power factor of the input side and improves the efficiency and stability of the whole machine
built-in braking unit.
3. BT30-ER25 Tool Holder with 45 degree pull stud
Shipping
Please open the package and check if there are some damages before sign,if there are some damages,please do not sign and contact us immediately.
Payment
Only accept paypal payment method.
Payment must be made within 3 days.
Problem&Feedback
Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
Pls contact us before you want to leave any negative feedback.
Refund
Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.