ProTek RC Prodigy 610 QUAD LiHV/LiPo AC DC RC Lipo Battery Charger 6S/10A/100W

Description

This is ProTek R/C "Prodigy 610 QUAD AC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger.
Prodigy 610 QUAD AC Features:
QUAD Channel Digital AC/DC Balance Charger
Maximum 10A Charge Current, up to 100W Per Channel
Maximum 5A Discharge Current, up to 20W Per Channel
10 Charge/Discharge Profiles
110V or 220V AC Input
Hi-Voltage LiHV charging mode allows charging end voltage up to 4.40V
Pre-Charge Function to Help Restore Lithium Packs with Cells Below 3.0V
Digital Power Program Delivers 3V - 24V to Power Other DC Devices
Supports up to 6S Lithium & 15 Cell Nickel Battery Packs
Lithium, Nickel & Lead Acid Compatible
Heavy Duty XT 60 DC input Connector
±0.01 Balance Tolerance Range
Multiple Safety Functions
Heavy Duty Metal Case
Back-Light Screen
Efficient Heat Sink
Charger Model
Prodigy 610 QUAD AC
AC Input Voltage Range
AC 110V or 220V
DC Input Voltage Range
DC 11.0V - 18.0V
Charge Current Range
0.1 - 10.0A
Discharge Current Range
0.1 - 5.0A
Charge Power Limit
Max. 100W x4
Discharge Power Limit
Max. 20W x4
Balance Current
Max. 250mA
Balance Tolerance
±0.01V
NiCd/NiMH Cell Count
1 - 15 Cells
Lithium Battery Types
LiHV, LiPo, Li-Ion, LiFe
Lithium Battery Cell Count
1 - 6 Cells
Pb Battery Voltage
2 - 20V
Digital Power
3 - 24V
Weight
1250g
Dimensions
208x170x63mm
NOTE:
To determine if this charger is suitable for your application, you must perform this calculation to determine the maximum amp rate the charger can supply. Divide the Watts of the charger by the Voltage of the battery pack. This will tell you the maximum amp rate the charger can deliver (Watts / Voltage = Amps). So using the 612 QUAD AC as an example and a 6S LiPo battery pack, would be 100 Watts divided by 22.2 Volts, which equals 4.5 Amps. This means that the charger can supply a maximum of 4.5 amps to a 22.2 Volt 6S battery. This amp rate will gradually reduce as the battery voltage increases during the charge cycle.
IMPORTANT:
1)
DO NOT
leave the battery in your model when charging
2)
DO NOT
leave unattended when charging
3)
ALWAYS
balance charge the battery
4)
ALWAYS
use a LiPo charging bag
5)
YOU MUST
use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
6)
YOU MUST
not over discharge the Li-Poly battery pack
7)
READ &
UNDERSTAND
the instructions carefully before operating this battery
Includes:
(1) Prodigy 610 QUAD AC Charger
(1) DC Power Input Cable w/XT60 Connector
(1) AC Power Input Cable
(1) JST Connector Charge Lead
(1) Futaba Connector Charge Lead
(4) T-Plug Charge Leads
(1) Alligator Clip Charge Lead
(2) Battery Clamps
(4) XH Type LiPo Balance Board
NOTE:
Included power cord is only compatible with Type B 110V outlets. "Type E/F" (PTK-5316), "Type G" (PTK-5317), and "Type I" (PTK-5318) power cords are available and must be purchased separately.
WARNING NOTE:
This charger is not recommended for use with Traxxas batteries with ID connectors or Spektrum Smart batteries with IC connectors. Charging batteries equipped with ID or IC connectors may require additional steps in order to safely balance charge your Lipo batteries. Please refer to your vehicle or aircraft owner’s manual for recommended batteries and charging equipment.